History of the company

In 1920, Charles and Axel Almkvist Johnson built the first petrochemical plant in Sweden.

While the company provides supplies of fuel for cars, whose number is constantly growing. There was also built a network of petrol stations. After the Second World War, the Swedish economy experienced a sharp rise and fueling Nynas have become commonplace in the country. In addition, roads in Sweden require a huge amount of bitumen. Nynas and began to produce it. For this new production facility was opened in the city of Gothenburg.

In the 70s the economic situation began to deteriorate, and came a time of crisis. Oil prices rose sharply and the situation with the supply of oil has become uncertain. In this connection, it was decided to focus on specific products. All gas stations were sold. They were invested in technology hydrotreating to allow for specialized naphthenic oils.

In the 1990s Nynas has expanded its area of ​​influence through the acquisition of a leading UK manufacturer of bitumen. In recent years, considerable resources have been invested in the plant in Ninaskhame, including a new hydrogen production, advanced laboratories and clean power.

Today, Nynas because of its relation to innovation is the leader in its segment. The spirit of the founding fathers of Nynas continues to live to this day.

Since 2012 MR representative in the territory of the Republic of Kazakhstan is "Asiaremenergo" llp. The competence of Asiaremenergo includes: advising the customer's experts, pre-project survey sites, preparation and coordination of technical solutions, service and after-sales service and technical support of MR products.

Inventive spirit, competence, continuity

- These are the three permanent components, which from the beginning laid the foundation for the activities of MR success of the company and will remain fundamental for us in the future.

Ingenious invention at the right time

The company originated in one of the districts of Regensburg Reinhausen. Since its inception in 1868, the company produced a sawmill equipment. Andreas Shoybek in 1901 renamed the company to Maschinenfabrik Reinhausen (MR). Engineer Dr. Bernhard Jansen invented in 1926 by a switching device such as a resistor, with the help of which you change the transformation ratio under load. In collaboration with the brothers Oscar and Richard Shoybek product became known and has been recognized worldwide as the "OLTC REINHAUSEN". At the end of the second World War, the demand for the tap-changer has increased dramatically. In 1953, Oscar and Richard Shoybek allowed to operate a modern factory, which in later years has steadily expanded.

Innovation and new business areas as success factors

Constant innovation of products and processes have also contributed to the successful development. In 2000. there was a technological breakthrough, marked by the use of vacuum technology. A large number of patents, licenses sold and the opening in 2007 of a new test center in Regensburg - all this says about the special attention paid to innovation.

The acquisition in 1997 from Siemens AG of reactive power compensation in medium voltage, and in 2003 the company AEG business segment for reactive power compensation for low voltages, as well as buying 1999 Messko Albert Hauser GmbH und Co heralded new stages continuous expansion of the electric power industry.

Today, the company has developed MR professional and convenient solution for the replacement of RPN: instead of the standard type switch RS, RNOA, RNTA etc. Are offered such as switches and OILTAP® VACUTAP® firm MR.

Access to the international level and the establishment of subsidiaries

The gradual and constant promotion of business outside of Germany laid the foundations for the further successful development of the company, which continues to this day. Already in 1980 founded the first subsidiary company in Brazil. Since that time, MR constantly expanding network of subsidiaries, whose total number worldwide has reached 23. So there were unique in its kind close ties with the customer and network of service centers and departments.

Since 2012 Messko representative in the territory of the Republic of Kazakhstan is TOO "Aziyaremenergo." The competence Aziyaremenergo includes: advising the customer's experts, pre-project survey sites, preparation and coordination of technical solutions, service and after-sales service and technical support products Messko.

Founding of the company

In 1911. Albert Hauser founds the company Precision Mechanics for the production of high-precision scales. Later, in 1932, the company is developed based on the measuring principle Bourdon spring. Modern thermometers Messko firms use the same, essentially, a reliable measurement principle.

The appearance of the brand Messko

In 1935 the trademark MESSKO. Brand name is made up of German words «messen» (measured) and «kontollieren» (control). Prior to this, the company has successfully equips temperature sensors cars Bugatti and Mercedes.

In 1960., Messko develops the first measuring instruments for industry-transformer structure. Thus, the company is opening a new market. Laid the foundation for the production of a number of instruments for electric utilities. In this direction, the company is developing rapidly. Already in 1965, completed the development of thermometers with freely adjustable microswitches.

In 1990., The light appears termosignalizatorov new series, which, in addition to measurement functions, to extend the capabilities of data transmission on the results of measurements.

Merger with MR

In 1999,., Messko becomes subsidiary of MR (Maschinenfabrik Reinhausen). This partnership Messko become one of the most important suppliers of instrumentation for utility companies and industrial companies worldwide. This, in turn, gave impetus to expand the product line of the company.

Innovation and new business areas as success factors

Certainly, products Messko, the mid-2000s reached recognition not only due to the high quality and reliability, but also as a product that delivers a subtle engineering calculation and innovative solutions. Are increasingly used digital technology in the produced Messko equipment. In 2004goda, started production in a digital thermometer MTeC. Now, consumers Messko an opportunity not only to obtain high-precision measurements, but also to control the cooling system of the transformer.

More technologically advanced product of Messko is maintenance-free dehumidifier MTrab. This device removes, with operating personnel, the need to make periodic replacement of silica gel desiccant.

Since 2012., Is widely used MLog - device for monitoring the cargo during transportation. MLog registers, stores and transmits data from anywhere on the conditions of transportation of cargo.

Today introduced in the production of transformer oil analyzer MSense. This device will allow to prevent aging of the paper insulation and transformer oil long before they occur.

In addition to creating a supernova devices Messko company modernizes long known devices (Buchholz, tubular and arrow Level indicators, flow switch) introducing modern technologies and innovative design solutions.

I would like to highlight individual design solutions that improve the performance of devices Messko:

the use of triplex (multilayered) glasses with UV filters

all instruments are made of stainless steel

measurement mechanisms interact with the indicator arrow through magnetic coupling

an increased number of contacts Alarm

the use of the analog signal 0,4-20mA, the possibility of its transformation into a signal RS-485

easy access to the switching contacts, without dismantling the unit and drain fluid izolyatsonnoy

the ability to integrate all devices in the alarm system and automatic control.

Quality assurance

Due to the continuous improvement of its products, a powerful test base, high level of control of production, the company Messko provides 5-year warranty period for its products. All procedures related to service and warranty service, provide experts LLP "Aziyaremenergo."

Since 2012, representatives of "Chemical Plant im.Karpova" on the territory of the Republic of Kazakhstan is TOO "Aziyaremenergo." The competence Aziyaremenergo includes: service-sales service and technical support of products of JSC "Chemical Plant im.Karpova."

History of the company

One of the oldest plants of the chemical industry in Russia, JSC "Karpov Chemical Plant", founded in 1868. There was an experimental base of domestic and world chemical science.

The rich history of the company keeps the brightest pages of creative work of many generations of chemists, prominent scientists worldwide.

Traditionally, the company specializes in the production of fine chemicals. At the end of the XIX century here at the former Bondyuzhskoe factory work of the great Russian chemist scientist of world renown - Mendeleev.

Modern enterprise, high standards

Today, the plant - a set of productions of more than 40 kinds of products of inorganic chemistry technology, food and reactive qualifications, medicines and substances, as well as building materials. Including: sodium sulfite, sodium thiosulfate, magnesium sulfate, calcium chloride, sodium metabisulphite, sodium sulfate, barium sulfate, silica gel, crushed limestone, extruded polystyrene.

The company's products are of high quality and is used in almost all sectors of the economy. Quality management system complies with the requirements of national and international standards ISO 9000.

Along with the supply of products to the Russian market, the company exports its products in the country and abroad.

Convenient geographical location, availability of infrastructure, vacant production premises and facilities for energy-carriers - create favorable conditions for attracting investments in the business enterprise.

Thanks to the work carried out by the diversification of production, innovation and resource-team of the company is confident in the future.

Since 2012, representatives of ANIITT "Record" on the territory of the Republic of Kazakhstan is TOO "Aziyaremenergo." The competence Aziyaremenergo includes: advising the customer's experts, pre-project survey sites, preparation and coordination of technical solutions, service and after-sales service and technical support of products ANIITT "Record".

History of the company

Research Institute of Alexander television technology "Record" (ANIITT "Record" Information on joint-stock obscheste) is based on the CSC at the Alexander radiofactory order of the Minister of the USSR Radio 10.09.1991g. №592.

CSC is at the Alexander radio factory was established November 12, 1956 order of the MRTP USSR №312, issued pursuant to the Resolution of the Council of Ministers of the USSR and the Central Committee of the CPSU from 19.10.1956g. № 1430-713.

That is, the founding date of ANIITT "Record" reasonably considered -19 October 1956.

SKB engaged in the development, implementation and maintenance products for the benefit of the Alexander radiofactory nine departments of the Ministry of Defense, Civil Defense, Ministry of Internal Affairs and other ministries and departments of the USSR. It includes items of special equipment, electronic warfare remote control various devices, warning systems without selection radio, video monitors various applications, television sets and other products.

At the moment of ANIITT "Record" develops and manufactures radio-electronic means of remote control devices, equipment, radio transmission of information for the organization of fire alarm, digital instrumentation (megger). To all activities and products available licenses, certificates, declaration of conformity.

Since 2013, representatives of "Elmotehnologii" on the territory of the Republic of Kazakhstan is TOO "Aziyaremenergo." The competence Aziyaremenergo includes: advising the customer's experts, pre-project survey sites, preparation and coordination of technical solutions, service and after-sales service and technical support for products of LLC "Elmotehnologii."

Equipment for power transformers

The main specialization "Elmotehnologii" - development and manufacture of equipment for installation and repair of power transformers.

Years of experience in the field of process equipment, high qualification of our company, good research and testing base, the automated system design, the current level of production guarantee high quality of our products.

Experience of process equipment at power stations in Ukraine, Russia, Czech Republic, Slovakia, Bulgaria, the Baltic States, Colombia, Argentina to the installation and repair of power transformers has confirmed its reliability and good performance and quality of consumer.

The company is not limited to the manufacture of products with specified characteristics. In your task will be developed, manufactured, tested and delivered technological equipment, which effectively solve the problems in the installation, repair and maintenance of power transformers.

Range of services for customs clearance, delivery and commissioning of the equipment, personnel training, warranty, 18 months, and post-sales, during the life of the service will allow you to save time and money, and effectively solve the problem only peculiar to you.